How Long Does Vanilla Extract Stay In Your System, Articles O

Bearings. A U type guard is permissible. When dies are being changed, maintenance performed, or any work done on the machine, the power to the upsetter shall be locked out, and the flywheel shall be at rest. Side grinding wheel having a diameter, thickness and wall - wheel is mounted on the diameter. A U type guard is permissible. (vi) A holdout or a restraint device shall protect the operator as specified in paragraph (c)(3)(i)(c) of this section and shall include attachments for each of the operator's hands. (i) Air valve and air pressure supply/control. (26) Feeding means the process of placing or removing material within or from the point of operation. (ii) Safety triprod. (3) Upon issuance of the decision, any party to the hearing may file exceptions within 20 days pursuant to subpart C. If exceptions are filed, the administrative law judge shall forward the decision, exceptions and record to the Assistant Secretary for the final decision on the application. The employer shall provide clearance between machines so that movement of one operator will not interfere with the work of another. Overhead-rope and chain-drive guard construction shall conform to the rules for overhead-belt guard. (37) Guide post means the pin attached to the upper or lower die shoe operating within the bushing on the opposing die shoe, to maintain the alignment of the upper and lower dies. The hood shall be constructed in such a manner and of such material that it will protect the operator from flying splinters and broken saw teeth. The maximum exposure angles specified in paragraphs (b) (3) through (8) of this section shall not be exceeded. This subdivision does not apply to flywheels with solid web centers. Subpart BAdoption and Extension of Established Federal Standards. If the conveyor runs overhead, precautions must be taken to prevent injuries from materials that may fall from above. (9) Continuous means uninterrupted multiple strokes of the slide without intervening stops (or other clutch control action) at the end of individual strokes. (vi) Oil swabs, or scale removers, or other devices to remove scale shall be provided. Occupational Safety and Health Administration, Outreach Training Program (10- and 30-hour Cards), OSHA Training Institute Education Centers, Severe Storm and Flood Recovery Assistance. Wheels bonded with clay, glass, porcelain or related ceramic materials are characterized as vitrified bonded wheels. 1910.160 Fixed extinguishing systems, general. Paragraph (h)(6)(xv) of the standard requires that the control system have provisions for an inch operating means; that die-setting not be done in the PSDI mode; and that production not be done in the inch mode. (1) Point of operations means that point at which cutting, shaping, boring, or forming is accomplished upon the stock. Momentary operation of the stop control shall immediately deactivate the clutch and apply the brake. Flywheels. (v) The hinged or movable sections of an interlocked press barrier guard shall not be used for manual feeding. (a) The device may not be used on machines using full revolution clutches. Recording of inspections shall be in the form of a certification record which includes the date the inspection was performed, the signature of the person who performed the inspection and the serial number, or other identifier, of the equipment inspected.